I’m in the process of replacing my Rocking Mountain engine monitor with your unit and was wondering if their manifold press & fuel flow senders will work with your unit.
Thanks!
Printable View
I’m in the process of replacing my Rocking Mountain engine monitor with your unit and was wondering if their manifold press & fuel flow senders will work with your unit.
Thanks!
What brand/model of sensors are they?
The fuel flow is either a Floscan 201A or 201B with 10 volts positive input. The manifold pressure sensor is hooked up and reads way low. Looks just like yours and I believe it is a GM car part. Do you happen to know the part number that is on the one you sell? Also all the cylinder head temperature gauges read in the high 400's in normal level flight.
Thanks for your time!
The FlowScan fuel-flow will work, but we have had several customers replace them due to failures. We ship the Electronics International FT-60 with our engine sensor kits which seems to be the most reliable transducer for FF.
The manifold pressure sensor we use is indeed a GM/Delphi part. I don't know the GM part number. It is just referred to as a 1 Bar sensor. GM gets them made in China while the ones we get are USA made and of a higher quality.