I have an AF-4500 and was wondering if it is possible to flip through the different screens from a button on the control stick?
- Matt
Printable View
I have an AF-4500 and was wondering if it is possible to flip through the different screens from a button on the control stick?
- Matt
Hi Matt - If you are referring to being able to switch from Map to EFIS to Engine displays or combinations therein, yes you can. To do this, you use one of the 'Switch Inputs' as discussed on page 91 of the 4500 Manual version 7.4. The inputs are located on the 'EFIS Main Connector' (page 101). You will need to configure the switch input in the EFIS' setup menu'; I forget the actual description but it's very obvious.
Regards,
/\/elson