Thanks Shawn!
Did the above, also Jonathan replied on the advanced/dynon tech support- he suggested hooking both cables into a hub and observing light pattern. I sent him the information below....
Type: Posts; User: Phillip
Thanks Shawn!
Did the above, also Jonathan replied on the advanced/dynon tech support- he suggested hooking both cables into a hub and observing light pattern. I sent him the information below....
Hi guys,
I have dual 5600s, non touch screens, and have lost communication between them
PFD set as single ahars, MFD with engine board. The PFD suddenly stopped receiving engine monitoring, and...
My vne is 200, vs1 is 60;
I set up MIN AS at 80 (1.3vs1) and MAX AS at 190 (0.95vne).
To have max AS indicate AND to not follow course, seems like would heave to be a gyro issue AND an...
As an update, buttoned up, reset gyros, turned AP on as a ground check - did exactly the same thing as above - left and right roll commanded ok, pitch commanded "up" regardless of what I told it to...
Sent this to trutrak several times over past few weeks, and left couple of voice mails, but no reply - if anybody has any thoughts, welcome your input - it's pretty specific about the product, so...
Sorry - Pin 2 and Pin 19 on the GTX327.
Your recommended drawing has icarus output from the 5600 going to pin 19 on the transponder. Stein has wired the GTN650 output to pin 19 on the...
Great!
On a related question, my Stein built harness from the GTN650 sends rs232 to pin 19, with icarus altitude from 5600 sent to pin 2.
Your diagrams have the icarus from the 5600 to pin 19 -...
Hi Guys,
I see on the new 5000 documentation that the transponder "should" be wired to the EFIS, serial port 2 to receive icarus altitude output - is this an absolute requirement due to the...
Thanks Bob,
I did check with Marc, and he wasn't aware of anybody that had done it, and recommended I pose the question in this venue - I think Matt used his to drive the VP-200 - but I'll have...
I know Bob L had posted about possibly using open serial ports to annunciate Gretz pitot status as it comes through the vertical power supplied converter.
Has anybody actually done this, and if...
Have been scouring manuals and forum, but can't find the answer!
How do I wire a stick grip screen change feature and warning mute/acknowledge feature for the 5600?
Thanks!
Phil
Thanks Rob!
Phil
maybe I'm confused, this is what is listed on the price sheet:
AF-BAT5000 AF5000 Battery backup $285
Rob mentioned the AF 5000 battery is really a TCW battery, so I'm trying to...
thanks Rob,
so what are the specs on the AF-5000? - is it the same as the IBBS 14V 4ah as they advertise as their regular battery?
If it's the same, looks like good discount through you - if...
Any response to CW (mark) regarding the 5600 backup battery vs the TCW?
Pros/Cons?
Am i right in thinking the TCW could provide backup power to multiple radios, etc, but the 5600 battery is only...
forget my post, found the answer deeper in William's thread....
Phil
I've got the flat pack panel cutout dimensions from William's post below. Does anyone have the depth of the flat pack? I can't seem to find it on this site or on Trutrak's...
Thanks!
Phil
Any updates on availability? Going to make the "first quarter" roll-out? Will sensor kit be the same as earlier models?
Thanks!
Phil Barnette