Please report back on the altitude issue ---- my hangar neighbor, and I, 5500T and 5600T Navworx, are considering the Echo, also.
Ron
Please report back on the altitude issue ---- my hangar neighbor, and I, 5500T and 5600T Navworx, are considering the Echo, also.
Ron
When wiring to an AF-5000 are you using two serial ports for GDL90 and TMAP to control the echoUAT or relying on barometric altitude being learned wirelessly fromthe legacy transponder interrogation replies?
Or what are your Serial 1 and Serial 2 settings on the echoUAT?
I've been trying to get an Echo UAT to talk to my 4500 - as a replacement for a NavWorx box. The output of the echo UAT is GDL-90 and 115k baud. I'm trying to figure out what format to configure in the 4500 so far with no success, it was previously port 3 ADSB-57Kbaud. There are a myriad of selections, but none say the baud rate or specifically gdl-90. Which should I be using?
Thanks!
Mark
Update your software to install the option for ADSB 115K.
http://dynonavionics.com/af-3000-400...re-updates.php
Is there any solution for ADSB in and out that has both frequences, 978 and 1090, that will show on the 4500? I know the GTX 345 has the capabilities but will it show aircraft and weather on the 4500?
No; the GTX345 (unless something's changed recently) does not have the option to output the GDL90 format that the 4500 accepts. I installed a GTX335 (1090ES Out-only), giving me the option to choose whatever In unit suits best. I'm running a Stratux right now with both 1090 and 978 receivers, serial out to the 4500 and Wifi to my Ipad.
--
Joshua Wyatt
RV-9A N627DW @ KRST - Flying
4500sEE + 4500sMFD | Stratux Dual-Band, GTN650Xi
Would the GDL-52 R work for ADS-B in with the AF-4500? Right now I