I have verified my setting are preloaded, however I have 3 parameters that are different. It is an RV7A.

My Zero lift setting is 68 (not 67)

My Landing Override is 8.0 (not 80)

My Critical AOA is is 15.0 (not 150)

The zero lift setting is close, the others are an order of magnitude off. Is this just a newer set of numbers or do I need to change to those to your posted settings?

Thanks

Roger

Quote Originally Posted by Rob Hickman View Post
RV-4, 6, 7, 8 Data

ZERO_LIFT_CRUISE, 67

PERFORMANCE_CRUISE, 680

APPROACH_CRUISE, 884

WARNING_CRUISE, 1242

CRITICAL_ANGLE_CRUISE, 1650

ZERO_LIFT_LANDING, -175

PERFORMANCE_LANDING, 599

APPROACH_LANDING, 779

WARNING_LANDING, 1310

CRITICAL_ANGLE_LANDING, 1826

AOA_AUDIO, 1

AOA_ENABLE, 1

LANDING_OVERRIDE, 80

USE_FLAP_ANGLE_SENSOR, 0

CRITICAL_AOA, 150

DECLUTTER_SEGMENT, 8