Quote Originally Posted by Chino Tom View Post
I had a similiar issue. I had a flight plan with two points, an intersection and the destination entered into my 796. When I went to look at the flight
plan in my 4500, only the first waypoint was shown, the intersection, and not the destination.
Verify that you do not have your serial output set to NMEA Fast. This will result in only sending the currently selected waypoint.

Thanks,
Ken Chard


Ken Chard

Engineering
Advanced Flight Systems, Inc.
320 S Redwood Street
Canby, OR 97013
503-263-0037 phone ext. 15
503-263-1163 fax
www.Advanced-Flight-Systems.com
www.Angle-of-Attack.com