Hi AFS,
I first noticed this in firmware 8.07.06 and it continues in 8.07.10. Hardware is a single EE-4500.
How to reproduce while flying:
- If on/engaged, turn off/disengage the autopilot
- Display the "Map" page with a zoom level of 7.4 NM
- Setup and activate a 'Direct To' to a nearby local airport and position the aircraft such that it is on course.
- Re-enter and activate the 'Direct To'. Preferably, it should be to the same local airport but it doesn't matter.
- I've noticed that the 1st "Direct To" always works as expected but that subsequent "Direct To" always have this offset. If the a/p is engaged in EFIS mode, the a/p will alter course to intercept the new course.
Regards,
/\/elson