@Mounz
I bought a Powerflarm Core at the Aero.
Now I'm searching good locations for the antennas in my Lancair.
As the Canopy frame has carbon all around it will get a challenge. (rest of plane is glass, gear doors are carbon)
So it looks like I have to get external antennas :-((

I use a garmin 496 and the 4500 to display the garmin TIS signal.
What are the correct settings. The GPS uses 9600 baud, so the flarm should be same?
What protocol should be set in the flarm? Garmin TIS V6 or V4/5

Christian