It does indeed work when a GNS-4xx/5xx/6xx/7xx is supplying the GPS data. It does not yet work with GPS approaches however it does draw a user defined glide-angle from a selected runway at the waypoint.
It does indeed work when a GNS-4xx/5xx/6xx/7xx is supplying the GPS data. It does not yet work with GPS approaches however it does draw a user defined glide-angle from a selected runway at the waypoint.
I wish I could figure out how to make that function work! I watched Rob do it in OSH, but now that I'm back home, I can make the HITS work but can't figure out how to set up the user
defined glide angle. Patiently awaiting the instructions and "how to"!
you need to go to flight plan page and enter the glide slope angle.
alan
How do you navigate to the Flight Plan page? Desperately needing a guide...
Bret
hit check and then the flt plan button
also i believe when you put hits on there is a glide slope button that you can set
I flew the new software today. HITS is great.
Rob, thank you for making your software better and better!!
Christian