To convert from Slick Mags to P-Mags what wires are used from the 4500 to the P-Mags for tach operation? Thanks, Larry
To convert from Slick Mags to P-Mags what wires are used from the 4500 to the P-Mags for tach operation? Thanks, Larry
ELECTRONIC IGNITION
The electronic ignition input is on connector pin 33. It will be necessary to move the RPM wire from Pin 32 to Pin 33. This should only be used if dual electronic ignitions are installed!
Engine Harness Pin 33 Electronic Ignition input.
Rob Hickman
Advanced Flight Systems Inc.