The labels displayed when I run the AOA calibration on my 5800 are not the same as those on page 29 of the manual. Is there an updated calibration process? I have the Dynon heated Pitot/AOA.
Thanks
Frank
The labels displayed when I run the AOA calibration on my 5800 are not the same as those on page 29 of the manual. Is there an updated calibration process? I have the Dynon heated Pitot/AOA.
Thanks
Frank
Last edited by Frank D; 09-04-2015 at 07:54 AM.
The pages can have these descriptions:
- [0,1][0L,AA,AP,PF,SA,HC]
- 0 - Cruise Configuration
- 1 - Landing Configuration
- 0L - Zero Lift
- AA - Angle Advisory
- AP - Approach
- PF - Performance
- SA - Save
- HC - Hanger Calibration
What page are you seeing?
I believe I am seeing these pages, but have no instructions on how to calibrate them?
AOA Calibration is listed on page 29 of the AF-5000 Manual v4.0
AF-5000 Manual v4.0 Updated 05/04/2015