-
Advanced Flight Systems
Which Princeton adapters are you using? Vans / 1SP / 2SP / 5SP? If you cycle power to the senders do you see the AD_VAL go high for one second then low for one second during self test?
-
My converters have no external identification, but they were purchased from Van's in 2007. With the converters powered off, the AD values are about 2500. When
power is applied, the AD values increase to about 3700 before decreasing back the the "empty" values of around 1760. The damping is too great to allow
the values to stabilize during a 1 second self test. These AD values are very different from what I saw on my old 4500 which had empty at 0 and full at 700
with these same converters.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules