-
EFIS expansion connector in Main vs ARINC drawings
When I wired the ARINC, I obviously used the Ex. Conn. pinout shown on the ARINC drawing, with serial #4 GND to pin 5. As I prepared wiring for a spare GPS puck (needs power from the 5V terminal in the Expansion Connector), I noticed that on the EFIS Main drawing, the Ex. Conn. shows serial GND to pin 2.
I realize that both pins are common to the chassis, and this is very 'late to the party', but if the drawings carry forward to current products, it might confuse someone doing a new install.
FWIW,
Charlie
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules