-
Connecting AFS 5600 with Garmin Aera 660
Hi,
Struggling to connect my AFS with a Garmin Aera 660 for it to drive my navigation.
I suppose it works the same way as the Garmin 396/496 and it outputs RS-232 Serial 4800 or 9600 NMEA format, but I can't seem to get it working. The system is not responding to any GPS signal. I have not connected the data ground wire - only the TX and RX... could that be the reason for garbled data ? Should I consider the Aera 660 as a 396/496 and select NMEA/AVTN as input instead of NMEA 4800 ?
The setup of my MFD with the connection to Serial #1 as NMEA 4800 and my GPS Source 3 set to Serial 1:
This shows the setup (only setup possible) on the Garmin Aera 660:
When I do a loopback test I only see this (also tried to disconnect and that returns no data back (so there is a connection). Does the loopback look correct (what should I expect to see) ?
Hope you can help?
Per - RV6A - Denmark
Last edited by PAN-Denmark; 11-13-2019 at 02:35 PM.
Reason: orientation of images changed.
-
Resolved by providing good Serial connection ground. It works great.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules