I recently retired my Garmin SL30 and replaced it with the Dynon/Trig panel/remote unit.
What changes do I need to make in the 5600T with Advanced Control Module to integrate this radio?
Jim
I recently retired my Garmin SL30 and replaced it with the Dynon/Trig panel/remote unit.
What changes do I need to make in the 5600T with Advanced Control Module to integrate this radio?
Jim
Last edited by N37PK; 01-02-2020 at 09:58 PM.
1. Turn off the serial port that the SL30 was using
2. Scan for the new radio in Advanced SV-NET Menu
3. Change the SET > CAL > Radio menu to the new Dynon Com radio and serial number
Rob Hickman
Advanced Flight Systems Inc.