-
Oil and Fuel pressure VDO sensors
Anyone know the correct ohm range for the Oil and Fuel pressure VDO sensors running on an AFS-3500 s-type and a Lycoming YIO-360-M1B? I found a VDO oil pressure sender 0-145 psi 10-184 ohms w/11 psi low alarm switch 1/8”-27 NPT coming in the mail. The fuel sensor is acting up too again. Need to get the right replacements
Last edited by timotb; 10-07-2021 at 10:33 AM.
-
Advanced Flight Systems
They should be the 10-180Ω you have selected. We don't normally use the alarm switch versions but if you have a need then go for it.
We do have the sensors in stock for Oil, Injected Fuel, and even Carbureted Fuel pressures. 503-263-0037 x 2
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules