What setting should I use on the serial port page to output GPS/NMEA at 4800 baud on serial 4 to a TruTrack Digiflight IIVS autopilot?
Is there anyway to get the autopilot to follow the heading bug, or does that require an ARINC interface?
Peter
What setting should I use on the serial port page to output GPS/NMEA at 4800 baud on serial 4 to a TruTrack Digiflight IIVS autopilot?
Is there anyway to get the autopilot to follow the heading bug, or does that require an ARINC interface?
Peter
It will only output 9600 Aviation format, that should work for the AP. You need an ARINC and a VSG AP to follow the heading bug.
Rob Hickman
Advanced Flight Systems Inc.
Rob, thanks, setting to AVTN/AVTN, and the baud on the AP to 9600 has solved the problem. Peter