I have discovered my issue with sometimes intermittent operation of the Slick RPM sensor. Now, I need some long term help.
Ever so often, the RPM indication becomes intermittent. I always check the spade connectors I use to connect the sensor to the harness. I never find anything and it starts to work again. My thinking is that I am getting oxidation on the male/female spade connectors and when I pull them apart and reconnect, I am cleaning them.
Is there a different connector to use? I would be happy with a small D-SUB connector if there was something less than the 9-pin connector available.
Alton
AFS-3500 (non-s)