I just did the backup / upgrade to 8.8.35 / restore sequence today. Don't know if that might have fixed my earlier problems.
Either way, I have the latest software available and a configuration that works for me!
I just did the backup / upgrade to 8.8.35 / restore sequence today. Don't know if that might have fixed my earlier problems.
Either way, I have the latest software available and a configuration that works for me!
Hi Shawn,
We have the same Problem with our 3500S. Ca you please email me the instruction?
Mgeiss at gme.de
Markus
Vans RV7a flying D-EMRV
Marcus - your email just bounced - says it is full......
Ralph
Oh, sorry mgeissatgmx.de is the Email.
Markus
Vans RV7a flying D-EMRV
Before changing any calibration of the EFIS be sure you are not experiencing blockage of the ports / tubing by removing the lines from the display and verifying smooth flow with something like a large syringe. Place some tape over the hole and then ensure you achieve a vacuum without leakage before concluding that the EFIS needs calibration.
Shawn makes a great point here - I had taken mine apart and bench checked it before I even asked.....