AF5600 will not draw holding patterns/ PT

[airtoby]

I have a AF5600 and a GTN650. The efis will draw all phases of the flight plan except the holding patterns and procedure turns.
Is this normal?

The autopilot will fly them and the GTN draws them on its own screen.

Toby

[rleffler]

I have a AF5600 and a GTN650. The efis will draw all phases of the flight plan except the holding patterns and procedure turns.
Is this normal?

The autopilot will fly them and the GTN draws them on its own screen.

Toby

Sounds like you may have an older AFS ARINC module. If that is the case, upgrade to the Dynon SV-ARINC. If you already have the Dynon version, I would give Jonathon a call.