-
AFS 4500 with Floscan 200
I've installed a 4500 into my aircraft and have a floscan fuel flow transducer. It had a K factor of 30,000 which was accurate in my previous legacy Dynon panel. Is there a starting point K factor to get me in the ballpark? I was thinking around 800.
Thanks
Rocky
-
Advanced Flight Systems
AFS k-factor value is just counts per gallon / 100. So if your k-factor was 30,000 on a Dynon system you should start with 300 on your AF-4500.
-
That makes more sense.
Thanks Jonathan
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules