I just upgraded from the 3500. I have the audio set to 100% but I can bearly hear the warnings. With the 3500 they were very easy to hear.
Alan
I just upgraded from the 3500. I have the audio set to 100% but I can bearly hear the warnings. With the 3500 they were very easy to hear.
Alan
Alan, do you have an intercom or audio panel?
audiopanel pma8000
Which pin are you feeding the EFIS audio into?
Trevor ,
I found the problem. On myLeft screen audio was set to 80% and on my 2nd screen 100%. When I changed the left screen back to 100% sound was normal again.
Alan
Alan, you should only have audio from one screen connected to your PMA-8000. You can just turn the volume down to 0% on the other unit. The unit in front of the pilot should be the one connected to the PMA-8000.
roger
alan
Just a question for clarification. In a two screen setup if there is cause for the second screen to issue an audio warning that message is passed to the primary screen and the audio warning made there, correct ?
It doesn't exactly transfer the warning, but since all of the range files are the same, it triggers both screens if a sensor is out of range.