Activity Stream

Thanks, Bob!

Many AFS/Dynon devices are SV network capable and require being plugged into a SV-Hub to communicate with each other. In the CAL menu, from the SV...

Thanks, Jonathon. I see references to SV in my configuration. Does that mean that there is likely an SV Network already present (for other...

The AF ARINC adapter predates the entire SkyView Network as a standard, and communicates with the EFIS instead via RS-232. Three of the no longer...

Thanks, Jonathon! I actually haven't looked behind my panel yet (and don't know how the various components are wired) so I have a possibly trivial...

Hal, that is the expectation for sure. Not sure why it isn't activating the next leg as you fly through the waypoint. We'd like to see what...

Dimmer is manual control through the EFIS, we do not support dimming through external controls. To adjust brightness, press the CHECK button to...

Yes the SV-ARINC will draw holds and yes it will send label 204 baro alt to the navigator. Upgrade is fairly simple, make sure you have a free...

Thanks, I guess I never knew it provided more than just radar and traffic. What else don't I know?

Jonathon, thanks for the quick reply. I suspected the reason for the purple boxes was that the EFIS doesn't believe I'm flying that leg. But I AM...

Gone but not forgotten. We sell replacement Crossbow remote magnetometers for $150. Call our sales line next week and we can set you up, thanks.

Check that the ethernet cable is plugged in to the back of each screen. If you still can't see engine data on the MFD take pictures of both...

This is coming from the ADSB receiver.

HITS boxes for the active flight plan leg are pink, and HITS boxes for nonactive legs on the flight plan are purple. If you are seeing the darker...

They are the same, so yes, I would follow the bulletin instructions for your serial number. Give Jonathon a call if you have concerns.

The ARINC speed change is relevant to all AFS EFIS displays with SV-ARINC or ACM ARINC adapters from 16.10.25 software going forward. This is a one...

The speed change wasn?t until one of the 16.10.* releases. I don?t recall the exact release, but the readme file will document the change. Think...

Hi Jonathon, Thanks for the pointer to the new version. The update instructions mention that the ARINC Out speed from the GPS Navigator needs to...

Did you update the software on both EFIS displays or just one? Is your ethernet cable plugged in and ethernet connection working? Easiest way to...

Uploaded new software yesterday and noticed adjusting screen brightness (DIM) on PFD no longer applies to MFD. Is there an option for synchronizing...

Ok will do. This is a touch screen 5600

Suggest we move this conversation to a forum better able to handle rich content. Email support@advanced-flight-systems.com screenshots of the...