Thanks, I will try that, question though, is it only last flight that is accessible or is there an option for other flights as well?
Type: Posts; User: rvdave
Thanks, I will try that, question though, is it only last flight that is accessible or is there an option for other flights as well?
I recently had a severe turbulence encounter over the smoky mountains, never experienced anything like that and wondering if there?s a way to see what the g force was at that moment by accessing my...
While working on installing ems220 module and scanning sv devices noticed sv arinc and sv comm both channel B are red, all other devices both channels green. What does one red channel indicate? Comm...
Getting ready to install the engine management module ems-220 in my flying rv10, wondering if it requires its own programming, does scanning the sv system allow the currently installed sensors to...
Am on a trip after getting current data to usb devices, am not getting geo referencing on charts but am getting my airplane showing on airport diagrams. I?m wondering if there is corruption in either...
Thanks for the info Bob, sounds like this will be a good upgrade.
Sounds like what I will do. Looking at installation manual, it looks like 37 and 25 pin connectors will simply unplug from efis to ems-220? Does each screen connect via Skyview hub? Do I need to...
Just had to pull my 5600 pfd to send in for repair and no surprise realizing i can’t legally or safely fly without it. No engine parameters, transponder, fuel gauges primarily. I have nav and comm...
Doh, after I posted I realized I was tunnel visioned on the gps arinc speed, I neglected the Nav portion, after checking that all is good now, thanks for the follow up.
Ifd550 gps is working since changing to high speed but just noticed I am not getting ils to work. Identifier shows up in frequency window and Morse code is detected but I am getting no signal lock....
Just upgraded and loaded most recent version and after updating all screens started plane for a flight and was getting a gps integrity error even though ifd550 was working fine, just not...
I would favor that feature.
Although I dont think its afs related Ive been having a block of frequencies cutting out with tx fail indicating on ifd550. Contacted Avidyne, through downloading data and sending to their...
The newer v16 software shows: Fixes problems with VAL 2KR Nav radio. What is the software addressing for this radio?
Not sure if you’ll have to recalibrate but for sure check all status settings, aural cues on, volume, aoa on, etc.
A while back I asked if it was possible to add the HSI to inset windows, is that something that is being considered ?
May have to reload hr terrain, I’ve had to do that before if it’s corrupted or missing data.
The hr terrain doesn’t load but the usb stick must remain connected for it to see hr terrain, is this how you have it? I would do the v16 separate then other files after.
Edit: Noticed you...
The Vizion autopilot head has scrolling bars to indicate which way it is out of trim, would be nice to see a display of some kind on the efis.
Looks like install manual 15.1 page 31 describes magnetometer calibration.
Just finished recalibrating aoa with new software and love the aural cues of aoa while keeping eyes outside. Thanks AFS for following up and providing this great feature.
Doesn’t that come from your gps navigator?
Could you have changed serial port assignment or deconfigured something? Best to go back and look at assigned ports to make sure they are correct.
Any update on inset windows/new software release?
Interested also