-
TFR Rendering Problems AF5000 OS:1
Hi,
With POTUS staying in NJ there is many times a complex TFR centered over Bedminster, NJ. Fortunately, there are several cut-outs for fringe airports in the outer ring with one for our airport.
The bad news is that my AF5000 OS:1 system with the latest software cannot render the shape of this TFR. It renders a circular outer ring until it gets to the first cut-out and then gets confused and the shape displayed looks like a kind of half moon image. I will post a picture of this when I can.
Anybody else seen this? What can I do to fix it?
Thanks,
--paul
Last edited by pstav; 08-18-2017 at 01:06 PM.
-
Advanced Flight Systems
I'll have this looked into by our software team. Thanks for reporting this bug.
Can I get you to log the serial port data for a couple of minutes? Would you be willing to record the TFR data so we don't lose the shape?
Before you fly:
[SET] -> Hold [CAL] -> Admin Settings -> Locate the ADSB serial port number
Diagnostics -> [SEL] Serial Port Data Logging -> Rotate to Serial #? -> [SEL] -> [BACK] -> [BACK] -> [BACK]
This will begin the logging of the data.
After flying and receiving the TFR:
Then insert an SD Card and wait for the SD Card Ready flag.
[SET] -> [LOGS] -> [SYSTEM]
Will copy the SERIAL_* data logs to the SD card. Zip those up and reply them back to me at support@advanced-flight-systems.com.
-
Shawn,
I was able to fly today and get that data with your excellent instructions. That data is on it's way.
Here's a photo of me coming into KDYL on a heading of 45 degrees. You can see the circle of the TFR isn't completed:
Here's the Morristown POTUS TFR for reference.
Let me know if there is anything else I can do to help.
--paul
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules