Results 1 to 4 of 4

Thread: Uavionix ADS-B self as traffic

  1. #1

    Uavionix ADS-B self as traffic

    I just replaced my Navworx ADS-B with the Uavionix and my 5600 is showing my plane as traffic. I have my tail number and ICAO hex entered in the transponder config settings. Any idea how to correct this?

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Location
    Canby, OR
    Posts
    861
    Check your
    Shawn McGinnis

    Advanced Flight Systems
    support@advanced-flight-systems.com

  3. #3
    Member
    Join Date
    May 2016
    Location
    Largo, FL, Based at Clearwater Airpark KCLW
    Posts
    31
    Be sure your N no. and ICAO code are on your "setup" screen --- I had the same issue -- the ghosting went away once the AFS knew who I was.

    Ron

  4. #4
    That did it! I had not set up the Echo correctly. Thank you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •