Results 1 to 2 of 2

Thread: Oil Pressure Transducer

  1. #1
    Junior Member
    Join Date
    Mar 2010
    Southeastern, PA

    Oil Pressure Transducer

    I have a AF-3000 Non-S-type EFIS and EMS. I have recently changed my oil pressure transducer because it was acting up. I had a 0-100 psi. Swift type unit, and replaced it with a 0-150 psi. Swift unit. I didn't realize I had purchased a 0-150 psi unit until I installed it. I'm assuming the unit will output the correct pressure regardless of it's operating range. Is that a correct assumption?

    Thanks in advance.

    Steve Miceli
    Van's RV-6A
    IOF-360 FADEC
    Steve Miceli

  2. #2
    Advanced Flight Systems Shawn McGinnis's Avatar
    Join Date
    Sep 2012
    Canby, OR
    Different sensors react differently to pressure changes. You may need to re-calibrate the sensors lookup table within the EFIS. Email with the part number that you purchased and they can forward you the instructions.
    Shawn McGinnis

    Advanced Flight Systems

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts