-
V16 Question
I do not have CHT or EGT sensors connected to the 5600 -(I still have them connected to an EMS D10)
As such I have the CHT and EGT instruments set as 'OFF' in the settings. However, the grid that would show the CHT/EGT is still being displayed. Is it possible to stop the grid display?
Thanks,
Dick
-
Advanced Flight Systems
Sent this over to the software team and he has patched that issue. We should have a version available in the near future.
-
Thanks. If you need a beta tester for this let me know.
Dick
-
Senior Contributing Member
With the published release, all my V16 issues have been resolved but one. I sent Jonathon a dump awhile ago, but haven’t heard anything back from him yet.
The flap extension alarm alerts on my MFD on takeoff when the airspeed passes through Vfe. I have a VPX Pro controlling the flaps. The alert doesn’t happen on the PFD, which the VPX Pro is connected. Both the PFD and the MFD are set to alert at 100%.
I was told that setting the alert to 100% would disabled the alert, but that doesn’t seem to have an impact on the MFD. There doesn’t seem to be a method to disable the alert just on the MFD either.
Is the Vfe field shared between the EFIS across the network? What if I raised the Vfe setting on the MFD to something near Vne to disable the alert as a temporary band aid?
Last edited by rleffler; 04-20-2021 at 03:30 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules