Hi all, after starting my engine (Aerosport Power O320 with dual Lightspeed Plasma II+ ignition) I always turn each ignition off to make sure they're both working. Turning ignition 1 off everything is as expected however when I turn ignition 2 off the RPM indication on my AF3500-non S screens goes to 0 while the engine keeps making noise. That tells me the ignition systems are fine and I have an indication problem.

When I swap the red and yellow wires over the fault 'moves' from being with ignition 1 to ignition 2, which tells me the fault is on the RPM board.

How do I go about getting a replacement board?