Results 1 to 3 of 3

Thread: AFS 4500 with Floscan 200

  1. #1

    AFS 4500 with Floscan 200

    I've installed a 4500 into my aircraft and have a floscan fuel flow transducer. It had a K factor of 30,000 which was accurate in my previous legacy Dynon panel. Is there a starting point K factor to get me in the ballpark? I was thinking around 800.

    Thanks
    Rocky

  2. #2
    AFS k-factor value is just counts per gallon / 100. So if your k-factor was 30,000 on a Dynon system you should start with 300 on your AF-4500.

  3. #3
    That makes more sense.
    Thanks Jonathan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •