5600T AP Servo Compatibiity

[Frank D]

I have an early model AF-5600T. It has the second generation processor sold from 2013-2022, but has the older baseboard. BB version 6. Can I utilize any of the Dynon components? AP servos, AP controller, Com radio...?
Thanks,
Frank

[rleffler]

I have an early model AF-5600T. It has the second generation processor sold from 2013-2022, but has the older baseboard. BB version 6. Can I utilize any of the Dynon components? AP servos, AP controller, Com radio...?
Thanks,
Frank

I thought all 5000 series have SV-Network support, which would support the AP servos and sv-AP-panel. It wouldn’t use the olde AP controller since that functionality is built into the efis.

The comm radio support is all rs-232, so it’s not an issue.

Are you running the current software level off the web site? If so, you should be good to,go.

[Frank D]

The Early 5600s apparently do not support the Dynon SV-network. I am running the current software.

[rleffler]

The Early 5600s apparently do not support the Dynon SV-network. I am running the current software.

I don’t know the costs, but Rob did mention that they can upgrade cpu, memory, gpu etc to bring it in line with 6600 specs. I would reach out to AFS for details and costs. I would assume that would add sv-network support.