Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Wish list

  1. #1
    Senior Member
    Join Date
    Mar 2010
    Location
    gilford, nh
    Posts
    335

    Wish list

    1. Larger roll angle display with easy to read 30 and 45 degree marks
    2. trends tapes on airspeed, altitude, roll
    3. IFR enroute map option

    Alan

  2. #2
    also... a "green banana" on the map page showing where the selected altitude will be reached, and an auto pilot disconnect or mode change annunciator!

  3. #3
    Member
    Join Date
    Mar 2010
    Location
    Sequim WA US (WA59)
    Posts
    39
    Jenny should be more informative, progressively conveying just how badly the PIC is screwing up, like:

    1) Check CHT's.
    2) Hey banana brain, CHT's are still too high!
    3) With CHT's like that, this engine's gonna blow up any second now.
    4) Never mind CHT's, emergency landing checklist is on screen.
    Ron
    Murphy Rebel / Jabiru 3300A
    Dual AF-3400s (EF/EE+AOA)
    http://n254mr.com

  4. #4
    I've forwarded your request to Jenny!
    ---
    Trevor Conroy
    Technical Support
    Advanced Flight Systems
    Support@Advanced-Flight-Systems.com

  5. #5
    How about the ability to monitor a backup battery without having to be powered by it.

  6. #6
    I have a couple of items to add to the wish list:

    1. Data capture recorded in local time - I think all of mine are recorded in Zulu time.
    2. Allow the 'old way' for the fuel computer calculations - at our option. Previously, the fuel used only came from the flow-meter - now it also counts as fuel-used the amount in a non-filled tank. Confusing for those that became accustomed to seeing it the other way. Now if I fill my mains (39gal) and not my tips (18gal) - the fuel computer shows 18gal used and I haven't started the engine.

  7. #7
    Auto-pilot trim up/down indicator displayed on the EFIS screen. I noticed the G3X provides this feature.

  8. #8
    Here's one that's hopefully fairly easy...

    For those of us with FADEC equipped engines, can we get the % Horsepower as reported by the FADEC instead of plugging in manual values? The power chart for my engine sucks and is pretty much unusable for plugging values into the EFIS.
    Last edited by anymouse; 02-24-2011 at 09:00 AM. Reason: Stoopid typo

  9. #9
    We do take %hp from the FADEC stream. What type FADEC are you using?
    ---
    Trevor Conroy
    Technical Support
    Advanced Flight Systems
    Support@Advanced-Flight-Systems.com

  10. #10
    Quote Originally Posted by Trevor Conroy View Post
    We do take %hp from the FADEC stream. What type FADEC are you using?

    Told you it would be easy!

    I'm using Aerosance's FADEC. Is it fairly easy to make the change? I took a quick look a while back, but didn't see anything obvious. Pointme in the right direction and I'm sure I can get it done.

Similar Threads

  1. Wish List for the AF 4500/3500/3400 series
    By Mounz in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 13
    Last Post: 12-31-2013, 11:07 AM
  2. Check List - number of items in a list
    By nleonard in forum EFIS Installation Questions
    Replies: 2
    Last Post: 11-28-2011, 11:13 AM
  3. Can't get "OBS" under the list of items under the knob
    By 7AConnie in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 4
    Last Post: 10-14-2010, 08:21 AM
  4. Map short list of frequently used waypoints
    By melvinke in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 1
    Last Post: 03-25-2010, 07:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •