Results 1 to 2 of 2

Thread: Magnatometer and other question

  1. #1

    Magnatometer and other question

    1. The instruction manual for the 3500 says to use brass screws to mount the magnatometer. However, the magnatometer connector that came with the unit has steel screws that hold the connector shield/hood together. Is this alright?
    2. I have nothing installed in front of the firewall of my RV-8. Before I rivet the top front skin on I would like to power up all of the units with external battery power. This means that I won't plug in the connector that has all of the engines sensor wires to my 3400EM. Would it be alright to power up the 3400EM with this connector not plugged in? Thanks Lyle

  2. #2
    The screws on the cable are ok.


    You can power the system without the engine sensor hanress connected.
    Rob Hickman
    Advanced Flight Systems Inc.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •