Results 1 to 2 of 2

Thread: Any way to sync Dynon D6 baro setting to AFS baro setting?

  1. #1
    Junior Member
    Join Date
    Mar 2010
    Location
    Cedar Rapids IA
    Posts
    18

    Any way to sync Dynon D6 baro setting to AFS baro setting?

    I have a Dynon D6 as a "backup"... and of course it has to have the correct barometric pressure setting to read the correct altitude.

    Is there any way (maybe using a serial port) to push the AFS baro setting to the Dynon? It would be cool not to have to set baro in so many places in the cockpit.

    I think the Trio Pro Pilot has the same issue.

    Probably not possible, but thought I'd ask.

  2. #2
    At this time we do not output any baro information via Serial port. I don't believe the D6 accepts baro via serial either.
    ---
    Trevor Conroy
    Technical Support
    Advanced Flight Systems
    Support@Advanced-Flight-Systems.com

Similar Threads

  1. Gain or setting for AP and IAS climb
    By CharlieWaffles in forum General Discussion
    Replies: 9
    Last Post: 06-14-2016, 02:55 AM
  2. Setting Flight ID
    By Pella in forum AF-5600 & AF-5500 General Discussion
    Replies: 2
    Last Post: 12-12-2014, 02:55 PM
  3. Baro Pressure setting problem
    By Peter Pengilly in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 1
    Last Post: 07-17-2014, 11:18 AM
  4. Setting the clock
    By wooody10 in forum AF-3400s, AF-3500s, AF-4500s ... General Discussion
    Replies: 1
    Last Post: 05-28-2013, 04:56 PM
  5. Getting all those setting correct....
    By jkgoblue in forum General Discussion
    Replies: 2
    Last Post: 04-05-2012, 06:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •