Results 1 to 2 of 2

Thread: P-Mag tach connection

  1. #1

    P-Mag tach connection

    To convert from Slick Mags to P-Mags what wires are used from the 4500 to the P-Mags for tach operation? Thanks, Larry

  2. #2
    ELECTRONIC IGNITION

    The electronic ignition input is on connector pin 33. It will be necessary to move the RPM wire from Pin 32 to Pin 33. This should only be used if dual electronic ignitions are installed!

    Engine Harness Pin 33 Electronic Ignition input.
    Rob Hickman
    Advanced Flight Systems Inc.

Similar Threads

  1. wifi connection
    By Don Patterson in forum AF-5600 & AF-5500 General Discussion
    Replies: 3
    Last Post: 03-15-2016, 05:10 PM
  2. Expansion cable connection
    By rvdave in forum EFIS Installation Questions
    Replies: 2
    Last Post: 01-22-2015, 06:45 PM
  3. Expansion cable connection
    By rvdave in forum EFIS Installation Questions
    Replies: 2
    Last Post: 01-22-2015, 03:54 PM
  4. SL-40 Serial Connection
    By dnelson in forum EFIS Installation Questions
    Replies: 2
    Last Post: 07-26-2010, 01:01 PM
  5. Garmin 696 Connection
    By flickroll in forum EFIS Installation Questions
    Replies: 5
    Last Post: 05-12-2010, 07:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •