ARINC to Serial 1?

[Mgeiss]

In the Manual you write: The AF-ARINC module should be connected to EFIS Serial Port #3 or Serial Port #4. The Serial 3 & 4 are already used and i now install the ARINC an the AF Pilot.

Are there any Problems to connect the ARINC to Serial 1?

Markus

[Rob Hickman]

You can use any serial port.

[keemi1122]

The Serial 3 & 4 are already used and i now install the ARINC an the AF Pilot.........!!!!!!!!!!!!!!!

[Rob Hickman]

so use serial 1 or 2 ...............!!!!!!!!!!!!!!!!!!!!!!!