Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: AF-5600 & ATS KRT2 Radio (lose setting)

  1. #1

    AF-5600 & ATS KRT2 Radio (lose setting)

    I use two af5600 and ATS KRT2 Radio. When main power on palne restart, ATS KRT2 Radio forget vox setting. Or its set in EFIS ? (Where is it?)

  2. #2
    Will get Ken to look into it.
    Rob Hickman
    Advanced Flight Systems Inc.

  3. #3
    Ok, I'm waiting for this problem. (After reboot its always set to default settings, I need to change it every time when I start system.)

  4. #4
    I have Emailed Lucas at TruTrak, the EFIS does not save any of the radio settings.
    Rob Hickman
    Advanced Flight Systems Inc.

  5. #5
    Which version of software is your radio running? It displays the software version right at power up. Let me know. Thanks!
    Lucas
    Trutrak Tech Support

  6. #6
    Quote Originally Posted by TrutrakTech View Post
    Which version of software is your radio running? It displays the software version right at power up. Let me know. Thanks!
    Thank you ,but I am on vacation now. I can give you full answer after 20 of August. Beast regards Alexandr.

  7. #7
    No problem. Just let me know. Send me a PM if necessary to make sure I catch this.
    Lucas
    Trutrak Tech Support

  8. #8
    V 6.01 (Radio) thank you

  9. #9
    Maybe it's depends what Ian turne off first ? (Usually its radio then-> AF5600)

  10. #10

Similar Threads

  1. SV-COM-X83 Radio Setup
    By darnold in forum AF-5600 & AF-5500 General Discussion
    Replies: 5
    Last Post: 02-19-2016, 08:56 AM
  2. 5600 RPM setting for 4 cyl engine, 2 blade prop, dual LSE?
    By gonzo24 in forum AF-5600 & AF-5500 General Discussion
    Replies: 3
    Last Post: 12-09-2013, 07:07 PM
  3. GTN650 radio
    By art.pileggi in forum AF-5600 & AF-5500 General Discussion
    Replies: 2
    Last Post: 03-21-2013, 12:09 PM
  4. XM radio support
    By Deene in forum AF-5600 & AF-5500 General Discussion
    Replies: 4
    Last Post: 03-04-2012, 09:11 PM
  5. Any way to sync Dynon D6 baro setting to AFS baro setting?
    By gribbled in forum EFIS Installation Questions
    Replies: 1
    Last Post: 04-08-2010, 04:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •