I would probably start by replacing the 37pin cable between the module and screen. I have seen this fix related issues. Also check to see that you are running the latest software in the screen (v3.2.2) or at least v3.1.3
I would probably start by replacing the 37pin cable between the module and screen. I have seen this fix related issues. Also check to see that you are running the latest software in the screen (v3.2.2) or at least v3.1.3
Installed a new cable from L-Com. Got about 4 hrs on it now and all is good. Seems to have fixed the problem. Thanks.
Posting Permissions
Reply With Quote