-
Thumb drive prep
I have a dual 5500 SV TS panel and see that per instructions using the thumb drive or SD card for AFS software updates require the drive to be prepared properly before use. I usually use a SD card for updating so the question pertains to the following which is new to me. I need some guidance here please. I want to use the Seattle Avionics IFR/Sectional chart data. If starting out with a new 16GB mini thumb drive and want to use the Seattle Avionics sectional/IFR chart data , do I prep the thumb drive per AFS instructions before loading the chart data from SA or do I just load the chart data from SA onto the thumb drive and install the drive onto the EFIS?
Thanks, Larry
-
Advanced Flight Systems
The data should reflect this setup:
http://advanced-flight-systems.com/S...port.html#data
When you acquire a new USB memory stick / SD Card use these setup instructions:
http://advanced-flight-systems.com/Support/storage.html
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules