AFS 5600 and Non-listed transponder

[PAN-Denmark]

Hi,
I have a Dittel KTX2 Mode-S ES transponder. It should be able to be controlled and connected to various devices through the Com port.
I have connected it to Com2, and tried all the installed transponder types but can't get it to connect.

I have most luck with AFS/Dynon where I get responses in the diagnostics ""** - Deleted** x**Deleted" - however it's not the correct response as far as I can tell.



Any thoughts ? The transponder communicates either with 4800 or 9600 Baud rates. I have tried with both rates - on 4800 nothing gets through.

I will add other images in the thread (if possible).