-
G Meter error
Hi,
I am in Phase 1 flight testing with my RV8A that first flew in April 2019 after a 13 year build and now has 18hrs plus air time.
I have an AFS 3500 non 'S' unit that was ordered from the factory in about 2007 and not used until taxi trials started in 2018.
During flight testing I have been doing some maneuvers which would be getting close to 4 G (pull out on loops) and very tight turns (75 deg bank).
However, the maximum G reading I can get on the EFIS is +1.5 G and -0.5 G.
Any ideas on what might be the problem?
-
Advanced Flight Systems
Congratulations of finishing the build. To make sure we are on the same page can you verify that you are running 7.5.0 software on the EFIS? https://www.advancedflightsystems.co...re-updates.php
-
Hi Shaun,
I will have to check when next at the hangar but I have recorded in the Log:
Version 7.06.00MV15-AV40
Correct installed version is 7.05.00MV15
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules