I have a 3500 s model with upgraded synthetic vision. I see lakes but no runway markings. Am I missing something?
I have a 3500 s model with upgraded synthetic vision. I see lakes but no runway markings. Am I missing something?
What airport and version of software are you running?
Rob Hickman
Advanced Flight Systems Inc.
Email a picture of your EFIS about screen to : info@advanced-flight-systems.com
For the runways to draw you must have:
1. AF-3500s or AF-4500
2. SVN Key
3. SD card with current map data
4. Valid GPS signal
I will send a pic of the screen next time I get to the hangar. Today I gathered this info:
s/n 61368
sw: s8.8.25-mv16 April 11,2014
os: 842 January 13, 2011
fs: 1.13
ic: 4.1
vp-x na
network: 6.3
ip address 192.168.0.175
keys: svn
Make sure it is getting GPS altitude.
Rob Hickman
Advanced Flight Systems Inc.
Send the following pictures:
1. About screen
2. CALIBRATION > ADMIN SETTINGS > DIAGNOSTICS > ARINC GPS Test Page
You do have a SD card with the map data on it installed?
Rob Hickman
Advanced Flight Systems Inc.
It is in the manual, the SD card must be in the system with a map database for it to work.
Rob Hickman
Advanced Flight Systems Inc.